NDSU North Dakota State University
Fargo, N.D.
library-image

NDSU Institutional Repository

Computer-Aided Microwave Design System (CAMDS): Improvement, Verification, and Device Fabrication

Show simple item record

dc.contributor.author Sharma, Swetha Somshekar
dc.description.abstract This paper presents a review of the Computer-Aided Microwave Design System (CAMDS) as originally developed by Divya Bais. Its goal was to deal with microwave design and analysis problems presented in standard textbooks such as David Pozar’s Microwave Engineering. This work presents improvements to CAMDS and verifies its performance. The paper focusses on passive devices using microstrip transmission lines such as filters or stub tuners. Designs developed with CAMDS are compared with those reported by Pozar, simulated using the Agilent Advanced Design System (ADS), and then fabricated using an ADS layout. In appropriate cases, device performance is checked using independent computer analysis or measurement of the device response using a microwave network analyzer. The main results are an improved version of CAMDS and rigorous verification of its capabilities to produce useful designs for practical passive microwave devices. en_US
dc.title Computer-Aided Microwave Design System (CAMDS): Improvement, Verification, and Device Fabrication en_US
dc.date.accessioned 2012-07-20T18:15:06Z
dc.date.available 2012-07-20T18:15:06Z
dc.date.issued 2012-07-20
dc.identifier.uri http://hdl.handle.net/10365/21660
dc.date 2012 en_US
dc.thesis.degree Master of Science. en_US
dc.contributor.advisor Rogers, David A.
dc.subject.course Master of Science / Electrical and Computer Engineering, College of Engineering and Architecture, 2012. en_US
dc.subject.course Electrical and Computer Engineering. en_US

This item appears in the following Collection(s)

Show simple item record

Search DSpace



Advanced Search

Browse

Your Account