Kalpana Katti

Permanent URI for this communityhdl:10365/32107

2007 University Distinguished Professor (UDP) | Civil Engineering
https://www.ndsu.edu/ccee/faculty_and_staff/faculty/katti_kalpana/

Browse

Browsing Kalpana Katti by browse.metadata.program "Mechanical Engineering"

Filter results by typing the first few letters
Now showing 1 - 3 of 3
  • No Thumbnail Available
    Item
    Brain Tissue Mechanical Characterization and Determination of Brain Response under Confined Blasts Explosions
    (North Dakota State University, 2015) Rezaei, Asghar
    Mechanical experimental tests including stress relaxation, simple monotonic ramps, and impact loads were performed on porcine brain tissues to investigate the response of the brain under different loading scenarios. Linear viscoelastic models were employed to determine the applicability and limitations of the linear mechanical models in tension. In addition the lowest and highest stress values, which can be possibly applied to the tissue due to change in the strain rates, were investigated using stress relaxation experiments to implicitly address the two levels of strain rates. Porcine brainstem samples were tested in six stress relaxation experimental settings at strain amplitudes ranging from 5% to 30% in compression. The lowest stress was directly measured from long-term responses of stress relaxation experiments when the stress values remained constant. The highest stress level was determined by using the quasi-linear viscoelasticity theory and estimating the instantaneous stress of the samples at six strain amplitudes. It was hypothesized that there is a correlation between the two pure elastic behaviors. The hypothesis was true as a strong linear correlation was found between the two elastic responses. The results showed that the instantaneous stress values were 11 times greater than the long-term stress values, practically similar across all strain amplitudes. In the second part of the thesis, a number of computational studies were conducted using a validated human head model. The head model included major components of human head and underwent different blast scenarios in open and confined spaces. The study investigated the effect of reflections from the walls. The results show that when the head was in the vicinity of the wall, the biomechanical parameters were dramatically increased, especially in the corners. Comparing brain biomechanical parameters in confined, semi-confined, and open spaces under blast loads, the brain sustained greater stress and strain values, with larger duration of the loads, in confined spaces. Also, a primary blast injury (PBI) with a tertiary blast injury (TeBI) in a confined space was compared. The results indicated that the PBI due to the incident shock wave was much more injurious than TeBI due to blunt impact.
  • No Thumbnail Available
    Item
    Computational Biomechanics of Blast-Induced Traumatic Brain Injury: Role of Loading Directionality, Head Protection, and Blast Flow Mechanics
    (North Dakota State University, 2015) Sarvghad-Moghaddam, Hesam
    In this dissertation, blast-induced traumatic brain injury (bTBI) is studied with respect to the blast wave directionality, mitigation capability of helmet/faceshield, and blast flow mechanics using finite element (FE) and computational fluid dynamics (CFD) schemes. For the FE study, simulations are performed on a detailed FE head model using LS-DYNA, and CFD simulations are carried out using the ANSYS-CFX to examine the underwash development by analyzing the behavior of blast flow from different directions. The following tasks are conducted. First, the effects of the loading direction on the mechanical response of the head and brain is investigated through impact and blast induced loading on the head. Due to the differences in the shape, function, and tolerance of brain components, the response of the head/brain varies with the direction of the impact and blast waves. In identical situations, the head shows to have lower tolerance to side loading. Second, the inclusion of the faceshield as a potential head protective tool against blast threats is evaluated with respect to blast direction. The helmet-faceshield and helmeted assemblies are shown to be most efficient when the head is exposed to blast from the front and top sides, respectively. Faceshield is observed to be effective only in front blast as it might impose either adverse or no effects in other directions. The shockwaves are seen to form a high pressure region in head-helmet-faceshield gap (underwash effect) which induces elevated pressures on the skull. Third, the underwash effect’s mechanism is investigated through CFD simulations of supersonic shockwave flow around the helmeted head assemblies. CFD results reveals that the backpressure is produced due to the creation of a backflow in the exterior flow on the outgoing interior flow. The bottom and side shockwave directions predict the highest underwash overpressures, respectively. Finally, the ICP and shear stress of the brain is evaluated in case of underwash incidence. FEA results show that underwash overpressure greatly changes with the blast direction. It is concluded that underwash clearly altered the tissue response of the brain as it increases ICP levels at the countercoup site and imparts elevated skull flexure.
  • No Thumbnail Available
    Item
    Micromechanical Characterization of Brain White Matter with Bi-Directional Orientation of Axonal Fibers
    (North Dakota State University, 2015) Shankar, Saurav
    Axonal injury within the white matter of human brain and spinal cord has led to several diseases in the Central Nervous System (Karami and Shankar, [1]). Diffuse axonal injury, one of the forms of Traumatic Brain Injury is caused due to swelling and elongation of axons in case of explosions, small and severe accidents, falling from heights where the brain gets an impact due to sudden movement of skull or hit by an object. A brain tissue model with bidirectional orientation of axonal fibers within the white matter of human brain has been developed. This brain tissue represents a repeating unit cell (RUC) modeled in ABAQUS (finite element software) [2] which comprises of axons and extracellular matrix (Karami and Shankar, [1]). Hyperelastic material properties of white matter sheet corona radiata of a porcine brain with bidirectional orientation of axonal fibers within the extracellular matrix is considered (Karami and Shankar, [1]).