Browsing NDSU EXPLORE by Title
Now showing items 1-9 of 9
-
2014 NDSU EXPLORE Program Booklet
(North Dakota State University, 7/6/1905) -
2015 NDSU EXPLORE Program Booklet
(North Dakota State University, 7/7/1905) -
2019 NDSU EXPLORE Program Booklet
(North Dakota State University, 2019) -
2021 NDSU EXPLORE Program Booklet
(North Dakota State University, 2021) -
3-D Printing: A New Approach to Water Filtration
(North Dakota State University, 2015)People often find themselves in situations where clean drinking water is not readily available. One solution to this problem is the use of portable water filters. However, some water filters are too expensive or bulky to ... -
Converting 3D Point Cloud Data into 2D Occupancy Grids suitable for Robot Applications
(North Dakota State University, 2015)Point clouds are a common data type in robotics applications. They allow a robot to “see” its environment. Unfortunately, its use for path planning is somewhat limited. There is just too much data for a robot to look through ... -
Effect of coagulants in removing cyanotoxin-microcystinin drinking water treatment process
(North Dakota State University, 2015)The presence of cyanotoxins in source water is a worldwide problem. The most widespread cyanotoxin, called microcystins (MCs), produced from Microcystis Aeroginosa, can cause severe problems to the environment, animals and ... -
Investigation of Potential Anti-Microbial Agents Capable of Inhibiting the Growth of Microorganisms Associated with Dental Implantation-related Infections
(North Dakota State University, 2015)Statement of Problem: Approximately 500,000 dental implant procedures are performed every year, and this number is growing exponentially [1]. Data have shown that these operations have a failure rate of around 5 percent ... -
Ruggedness Test for Density Measurements of Flax Fiber
(North Dakota State University, 2015)Density is a fundamental physical property of a reinforcement for composites. It appears widely in calculations, which are mostly used for engineering designs. The density of homogeneous solid materials is generally ...