Show simple item record

dc.contributor.authorKersting, Lee
dc.description.abstractA CAT C6.6 turbocharged diesel engine was operated in dual-fuel diesel-hydrogen mode. Hydrogen was inducted into the intake and replaced a portion of the diesel fuel. Hydrogen was added across multiple engine speeds and loads until reaching the knock limit, identified by a threshold on the rate of in-cylinder pressure rise. In-cylinder pressure and emissions data were recorded and compared to diesel-only operation. Up to 74% H2 substitution for diesel fuel was achieved. Hydrogen addition increased thermal efficiency up to 32.4%, increased peak in-cylinder pressure up to 40.0%, increased the maximum rate of pressure rise up to 281%, advanced injection timing up to 13.6°, increased NOx emissions up to 224%, and reduced CO2 emissions up to 47.6%. CO and HC emissions were not significantly affected during dual-fuel operation. At 25% load an operating condition was observed with low NOx and nearly 0 CO2 emissions, which however exhibited unstable combustion.en_US
dc.publisherNorth Dakota State Universityen_US
dc.rightsNDSU Policy 190.6.2
dc.titleCharacterizing the Operation of a Dual-Fuel Diesel-Hydrogen Engine near the Knock Limiten_US
dc.typeThesisen_US
dc.date.accessioned2018-02-16T14:40:45Z
dc.date.available2018-02-16T14:40:45Z
dc.date.issued2014
dc.identifier.urihttps://hdl.handle.net/10365/27572
dc.subject.lcshCombustionen_US
dc.subject.lcshDiesel motor exhaust gasen_US
dc.subject.lcshHydrogenen_US
dc.rights.urihttps://www.ndsu.edu/fileadmin/policy/190.pdf
ndsu.degreeMaster of Science (MS)en_US
ndsu.collegeEngineeringen_US
ndsu.departmentMechanical Engineeringen_US
ndsu.programMechanical Engineeringen_US
ndsu.advisorPieri, Robert V.


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record