Browsing Mechanical Engineering & Applied Mechanics by Title
Now showing items 69-88 of 139
-
Impact of Recycling on the Mechanical and Thermo-Mechanical Properties of Wood Flour/High Density Polyethylene and Wood Flour/Poly Lactic Acid Composites
(North Dakota State University, 2016)This research concentrates on the recyclability of two wood plastic composites (WPCs) - wood flour/HDPE and wood flour/PLA composites. Two different filler loadings (30 and 50 wt%) were considered for each polymer composite. ... -
Impact. of Environmental Conditions on Fiberglass-reinforced Polyurethane Foam Composites
(North Dakota State University, 2010)Incorporating reinforcement within a polymer (i.e. composite) can obtain substantial performance increases. However, composites may he susceptible to conditions that could have a significant impact on their performance. ... -
Implementation Of Particle Model Control Approach To A Fixed Axle UGV
(North Dakota State University, 2010)Robotic vehicles are normally modeled as rigid bodies under general motion, combining translation and rotation motions. While such modeling results in motion controllers that are easy to implement, these controllers are ... -
Improving Performance Characteristics of Poly (Lactic Acid) (PLA) Based Nanocomposites by Enhanced Dispersion of Modified Cellulose Nanocrystals (CNCs)
(North Dakota State University, 2018)Poly(lactic acid), (PLA) is a biodegradable and biocompatible polymer which has attracted significant attention as a promising substitute for petroleum-based polymers. To optimize the usage of PLA in a wide range of ... -
Increasing Cotton Product/Waste Value Through New Use Development
(North Dakota State University, 2021)Cotton products have been used for centuries with relatively low value and their ubiquitous use generating large quantities of waste materials. This research’s goal was to develop new uses for waste cotton fiber and ... -
Influence of the Biaxiality Ratio on Multiaxial Fatigue of Metallic Materials
(North Dakota State University, 2014)The ability to model and predict multiaxial fatigue life without being too aggressive or conservative is of great interest to engineers. The purpose of this study was to examine the influence of the biaxiality ratio (σ2/σ1) ... -
Influences of Seawater Flows on the Degradation of Organic Coatings Applied on Offshore Wind Turbines
(North Dakota State University, 2022)The regular protection methods of offshore wind structures consist of the application of two or three layers of epoxy-based coatings with a polyurethane topcoat. The coating systems of offshore wind turbines are mostly ... -
Interfacial Characterization of Fibrous Composites by Cohesive Zone Method
(North Dakota State University, 2013)This work deals with investigation of the interface between unidirectional E-glass fiber and epoxy matrix composites. The two parts in this work are: 1. A periodically constrained finite element (FE) model built as a ... -
An Investigation on Residual Stress Build-Up in Cold Sprayed Metallic Samples: Effect of Stress Relaxation Heat Treatment
(North Dakota State University, 2022)Residual stress formation during cold spraying process may result in deteriorative effects on the performance of coating materials. The objective of this investigation is to characterize residual stress built-up in some ... -
Literature Review of the Aerodynamics of Flapping Flight in Micro Air Vehicle Applications
(North Dakota State University, 2014)Biological flapping wing flyers achieve flight maneuverability and efficiency in low speed flight environments that has not been replicated by man-made flyers. Micro Air Vehicle (MAV) design goals are to develop flyers ... -
Lubrication and Wear at Metal/HDPE Contacts
(North Dakota State University, 2012)In the thesis lubrication and wear at metal/HDPE contacts was addressed. In particular this type of contact occurs in artificial joint replacements. Wear of HDPE was recognized as a major factor limiting device performance. In ... -
Mechanical Analysis of Polycarbonate/Polysiloxane Block Copolymers and Blends
(North Dakota State University, 2013)Polydimethylsiloxane (PDMS) can be used to react with polycarbonate (PC) to generate PC-PDMS multiblock copolymers and PC/PC-PDMS-PC triblock blends to overcome the notch sensitivity of PC while maintaining its transparency. ... -
Mechanical and Surface Properties of Technical and Single Flax Fiber in Micro and Nano Scale
(North Dakota State University, 2017)The continued search for sustainable and eco-friendly materials led to the integration of bio-fibers as the reinforcement in composite materials. However, a wide variation in their mechanical properties poses a considerable ... -
Mechanical and Tribological Properties of Carbon Nanofiber Reinforced High Density Polyethylene
(North Dakota State University, 2014)High density polyethylene (HDPE) is widely used as a bearing material in industrial application because of its low friction and high wear resistance. Reinforcing polymers with the appropriate nanofillers is an effective ... -
Mechanical Characterization and Constitutive Modeling of Rate-dependent Viscoelastic Brain Tissue under High Rate Loadings
(North Dakota State University, 2019)In this dissertation, theoretical, computational, and experimental methodologies are introduced to determine the rate-dependent material properties of the brain tissue. Experiments have shown that the brain tissue is ... -
Mechanics of Surface Instabilities of Soft Nanofibers and Nonlinear Contacts of Hydrogels
(North Dakota State University, 2020)The research of this dissertation is formulated in two fields, i.e., the theoretical and computational studies of circumferential wrinkling on soft nanofibers and the swelling mechanics study of a bi-layered spherical ... -
Method for Compliance Controlled Adhesive Switching and Magnetically Controlled Switchable Adhesives
(North Dakota State University, 2013)Adhesives are used in a variety of ways and are so common that they are easily overlooked. Adhesive hooks, tapes, glues, and switchable climbing mechanisms used by insects and lizards are clear examples of how adhesives ... -
Micromechanical Characterization of Brain White Matter with Bi-Directional Orientation of Axonal Fibers
(North Dakota State University, 2015)Axonal injury within the white matter of human brain and spinal cord has led to several diseases in the Central Nervous System (Karami and Shankar, [1]). Diffuse axonal injury, one of the forms of Traumatic Brain Injury ... -
A Micromechanical Procedure to Characterize the Effect of Interface in Fibrous Composites and Brain White Matter
(North Dakota State University, 2012)A micromechanics computational algorithm for fibrous composites including fiber, matrix and interface is introduced to study the impact of interface on composite behavior. The domains are modeled by finite elements with ... -
Microstructural Characteristics and Mechanical Behavior of Anticorrosive Al-Zn Thermal Spray Coatings Deposited by Wire Arc Spraying and Cold Spraying Techniques
(North Dakota State University, 2019)Mechanical properties of thermal spray deposited coatings are highly influenced by their microstructural characteristics. The objective of this investigation is to evaluate the mechanical properties of thermally sprayed ...