Browsing Mechanical Engineering & Applied Mechanics by Title
Now showing items 78-97 of 139
-
Literature Review of the Aerodynamics of Flapping Flight in Micro Air Vehicle Applications
(North Dakota State University, 2014)Biological flapping wing flyers achieve flight maneuverability and efficiency in low speed flight environments that has not been replicated by man-made flyers. Micro Air Vehicle (MAV) design goals are to develop flyers ... -
Lubrication and Wear at Metal/HDPE Contacts
(North Dakota State University, 2012)In the thesis lubrication and wear at metal/HDPE contacts was addressed. In particular this type of contact occurs in artificial joint replacements. Wear of HDPE was recognized as a major factor limiting device performance. In ... -
Mechanical Analysis of Polycarbonate/Polysiloxane Block Copolymers and Blends
(North Dakota State University, 2013)Polydimethylsiloxane (PDMS) can be used to react with polycarbonate (PC) to generate PC-PDMS multiblock copolymers and PC/PC-PDMS-PC triblock blends to overcome the notch sensitivity of PC while maintaining its transparency. ... -
Mechanical and Surface Properties of Technical and Single Flax Fiber in Micro and Nano Scale
(North Dakota State University, 2017)The continued search for sustainable and eco-friendly materials led to the integration of bio-fibers as the reinforcement in composite materials. However, a wide variation in their mechanical properties poses a considerable ... -
Mechanical and Tribological Properties of Carbon Nanofiber Reinforced High Density Polyethylene
(North Dakota State University, 2014)High density polyethylene (HDPE) is widely used as a bearing material in industrial application because of its low friction and high wear resistance. Reinforcing polymers with the appropriate nanofillers is an effective ... -
Mechanical Characterization and Constitutive Modeling of Rate-dependent Viscoelastic Brain Tissue under High Rate Loadings
(North Dakota State University, 2019)In this dissertation, theoretical, computational, and experimental methodologies are introduced to determine the rate-dependent material properties of the brain tissue. Experiments have shown that the brain tissue is ... -
Mechanics of Surface Instabilities of Soft Nanofibers and Nonlinear Contacts of Hydrogels
(North Dakota State University, 2020)The research of this dissertation is formulated in two fields, i.e., the theoretical and computational studies of circumferential wrinkling on soft nanofibers and the swelling mechanics study of a bi-layered spherical ... -
Method for Compliance Controlled Adhesive Switching and Magnetically Controlled Switchable Adhesives
(North Dakota State University, 2013)Adhesives are used in a variety of ways and are so common that they are easily overlooked. Adhesive hooks, tapes, glues, and switchable climbing mechanisms used by insects and lizards are clear examples of how adhesives ... -
Micromechanical Characterization of Brain White Matter with Bi-Directional Orientation of Axonal Fibers
(North Dakota State University, 2015)Axonal injury within the white matter of human brain and spinal cord has led to several diseases in the Central Nervous System (Karami and Shankar, [1]). Diffuse axonal injury, one of the forms of Traumatic Brain Injury ... -
A Micromechanical Procedure to Characterize the Effect of Interface in Fibrous Composites and Brain White Matter
(North Dakota State University, 2012)A micromechanics computational algorithm for fibrous composites including fiber, matrix and interface is introduced to study the impact of interface on composite behavior. The domains are modeled by finite elements with ... -
Microstructural Characteristics and Mechanical Behavior of Anticorrosive Al-Zn Thermal Spray Coatings Deposited by Wire Arc Spraying and Cold Spraying Techniques
(North Dakota State University, 2019)Mechanical properties of thermal spray deposited coatings are highly influenced by their microstructural characteristics. The objective of this investigation is to evaluate the mechanical properties of thermally sprayed ... -
Microwave Torrefaction of Natural Fibers for Incorporation into Engineering Thermoplastic Biocomposites
(North Dakota State University, 2015)Little work has been done in the area of engineering thermoplastic biocomposites due to the increased processing temperatures which induce degradation of biomass. Torrefaction has been identified as an effective means of ... -
Minimum Favorable Conditions for Hydrogen-Diesel Combustion
(North Dakota State University, 2016)A test apparatus was designed and fabricated that allowed very small amounts of diesel fuel to be injected into a hydrogen-air mixture. This apparatus was designed to be able to operate near the limits of diesel fuel ... -
Modal Analysis of the Human Brain Using Dynamic Mode Decomposition
(North Dakota State University, 2020)The human brain is the most important organ of the human body. It controls our thoughts, movements and emotions. For that reason, protecting the brain from harm is of the utmost importance but to protect the brain, one ... -
Modeling and Optimal Control of Curvatures in IPMC's
(North Dakota State University, 2014)There has been a growing number of research activities in the area of using smart materials in day to day lives because of their ability to serve both as sensors and actuators. Ionic Polymer Metal Composites (IPMCs) are ... -
A Molecular Dynamics Study of Mechanical Properties of Carbon Nanotube Polymer Composites and Graphene Nanoplatelet Polymer Composites
(North Dakota State University, 2010)Carbon nanotubes have been the main focus in science and engineering fields lately for their extraordinary properties. But carbon nanotube fabrication process is very expensive, particularly for reinforcements and ... -
Nanomechanical Characterization of Tobacco Mosaic Virus Superlattice with Novel Atomic Force Microscopy Methods
(North Dakota State University, 2013)Tobacco mosaic virus (TMV) has been widely studied due to its excellent properties. In order to utilize TMV superlattice, this thesis initiates the study on its mechanical properties. The elastic modulus of TMV superlattice ... -
Nonlinear Fatigue Damage Accumulation in Aircraft Engine Alloys Multiaxial Loading
(North Dakota State University, 2013)Fatigue is considered to be one of the most frequent phenomena in the failure of many machine parts. Most of the prior studies on fatigue have been limited to uniaxial loading cases with a primary focus on constant ... -
Numerical Analysis of a PV/Microchannel Integrated CO2 Direct-Expansion Heat Pump Water Heater
(North Dakota State University, 2019)A steady-state numerical model of a PV/microchannel integrated direct-expansion CO2 heat pump (PV-DXHP) water heater is developed, validated, and analyzed in the present study. To accomplish the objectives, a numerical ... -
Numerical Investigation of Vibration in a Steam Turbine Control Valve
(North Dakota State University, 2017)A numerical analysis is performed at North Dakota State University to investigate and resolve steam inlet control valve vibration in a Minnkota Power Cooperative turbine. Pressure fluctuations resulting from an unstable ...