Search
Now showing items 51-60 of 84
Design and Fabrication of Micro-Channels and Numerical Analysis of Droplet Motion Near Microfluidic Return Bends
(North Dakota State University, 2019)
Three-dimensional spheroid arrays represent in vivo activity better than conventional 2D cell culturing. A high-throughput microfluidic chip may be capable of depositing cells into spheroid arrays, but it is difficult to ...
Evaluation of Corn Distiller’s Dried Grains with Solubles as a Functional Material to Replace Synthetic Resin in Wood Particleboards
(North Dakota State University, 2019)
Corn distiller’s dried grains with solubles (DDGS) is mostly marketed as a livestock feed due to its high protein content of 30%. Recently, the proteins in DDGS have shown potential to act as binding agents along with ...
Stress-Function Variational Method for Stress Analysis of Adhesively Bonded Joints
(North Dakota State University, 2014)
Recently, adhesively bonded joints (ABJs) has found more rapidly increasing applications in aerospace and aeronautical structures, ground vehicles, and flexible electronics than mechanical fastening and welding technologies. ...
Development of an Advanced Composite Material Consisting of Iron Matrix Reinforced with Ultra High Temperature Ceramic Particulate (TiB2) with Optimum Properties
(North Dakota State University, 2016)
This study was intended to investigate the mechanical properties and microstructure of iron based composite reinforced by ultra high temperature ceramics fabricated by powder metallurgy technique. The fabrication parameters ...
A Survey for Industrial Uses of Distiller's Dried Grains with Solubles (DDGS)
(North Dakota State University, 2012)
The increase in demand for corn ethanol has caused an increase in distiller’s dried grains with solubles (DDGS), which is a byproduct of ethanol production. DDGS is a cheap byproduct and is primarily used for livestock ...
Effects of Green Reinforcement Strategies on Mechanical Properties of High Volume Polymers
(North Dakota State University, 2013)
Green reinforcement in polymer systems have shown great promise in reducing cost, negative environmental effects, and dependency on nonrenewable resources. Both natural fillers and composite regrind can increase mechanical ...
Shock Tube Design and the Kinematics of the Hybrid III Dummy Head under Shock Waves of Blast
(North Dakota State University, 2012)
Traumatic brain injury (TBI) is one of the most common injuries to soldiers in warfare today. A TBI occurs when the human brain is damaged by a sudden force coming from the environment. In the combat field of combat, high ...
Modeling and Optimal Control of Curvatures in IPMC's
(North Dakota State University, 2014)
There has been a growing number of research activities in the area of using smart materials in day to day lives because of their ability to serve both as sensors and actuators. Ionic Polymer Metal Composites (IPMCs) are ...
Optimum Path Tracking of an Independently Steered Four Wheeled Mobile Robot
(North Dakota State University, 2012)
This thesis studies the navigational control problem for an independently steered and driven four-wheeled ground robotic vehicle, a subset of the larger problem of controlling self-reconfigurable robotic vehicles. A ...
Fabrication and Mechanical Characterization of Novel Hybrid Carbon-Fiber/Epoxy Composites Reinforced with Toughening/Self-Repairing Nanofibers at Interfaces
(North Dakota State University, 2012)
This research was aimed at fabrication and characterization of novel hybrid carbon-fiber/epoxy composites reinforced with toughening/self-repairing nanofibers at interfaces. For interfacial toughening, continuous electrospun ...