| dc.contributor.author | Giesler, Steven | |
| dc.description.abstract | People often find themselves in situations where clean drinking water is not readily available. One solution to this problem is the use of portable water filters. However, some water filters are too expensive or bulky to be economically sensible. A recent surge in additive manufacturing, involving the use of 3-D printers, has provided an alternative solution to this problem.
This project’s primary objective is to test the usability of 3-D printed water filters. There are two major aspects to testing the filters: structural and performance. The filters will be designed with AutoCAD software and manufactured in a 3-D printer. Laboratory tests will be conducted to measure the performance of the water filters.
The tests involve running manufactured wastewater with a known particle size distribution through the filters. Each filters’ performance is measured in three ways: net permeability, susceptibility to plugging and durability. The filters are expected to remove turbidity and Escherichia coli (E. coli) bacteria. Results show the current filters being tested can remove particles as small as 500 micrometers in size. This corresponds to conventional particle filtration (1 – 1,000 micrometers), but improvements in design are expected to screen out even smaller particles. Once an optimal design has been selected, new water filters will be manufactured from various polymers and modified with various surface coatings for specific contaminant removal.
A survey has been conducted to explore peoples’ perceptions to the risks and benefits of 3-D printed water filters. It is important to gauge both professional and public responses to this new application. An individual may soon download a water filter design from an online website (or submit a personal design), have it manufactured at a local 3-D print vendor and then use the subsequent filter. The low-cost process will produce a small, portable and functional water filter. | en_US |
| dc.publisher | North Dakota State University | en_US |
| dc.rights | NDSU Policy 190.6.2 | |
| dc.title | 3-D Printing: A New Approach to Water Filtration | en_US |
| dc.type | Presentation | en_US |
| dc.date.accessioned | 2016-01-22T22:54:20Z | |
| dc.date.available | 2016-01-22T22:54:20Z | |
| dc.date.issued | 2015 | |
| dc.identifier.uri | http://hdl.handle.net/10365/25540 | |
| dc.subject.lcsh | Three-dimensional printing | en_US |
| dc.subject.lcsh | Water -- Purification -- Filtration | en_US |
| dc.language.iso | en_US | en_US |
| dc.rights.uri | https://www.ndsu.edu/fileadmin/policy/190.pdf | |
| dc.relation.ispartof | NDSU EXPLORE: Undergraduate Excellence in Research and Scholarly Activity | |
| ndsu.college | Engineering | |
| ndsu.department | Civil and Environmental Engineering | |
| ndsu.advisor | Bezbaruah, Achintya N. | |
