Search
Now showing items 1191-1200 of 3438
Identifying Causes of Dissolved Oxygen Depletion and Determination of Sediment Oxygen Demand in the Souris River
(North Dakota State University, 2013)
The Upper Souris River was placed on the Environmental Protection Agencies (EPA) impaired waters list for low dissolved oxygen (DO). A Total Maximum Daily Load (TMDL) study was conducted to determine possible causes of DO ...
Iron Waste Based Point-of-Use Device to Treat Pesticides in Water
(North Dakota State University, 2019)
Organochlorine pesticide (OCP) contamination in groundwater is a problem worldwide, more severely in rural areas that normally cannot afford centralized water treatment systems. Iron nanoparticles have shown their ability ...
Ultraviolet Disinfection Pilot Study at the Fargo Wastewater Treatment Plant
(North Dakota State University, 2017)
A pilot study was carried out at the Fargo wastewater treatment plant to determine the impacts that flow rate, water quality, and system fouling may have on the efficiency of UV disinfection. A second-order model successfully ...
Enhancement of Dispersibility of Zero-Valent Iron Nanoparticles for Environmental Remediation: Entrapment and Surface Modification with Polymers
(North Dakota State University, 2012)
Nanoscale zero-valent iron (NZVI) particles have been surface modified and used for contaminant remediation. NZVI tend to agglomerate due to magnetic and van der Waals forces and form larger particles that settle down in ...
Modeling of Dynamic Hydrologic Connectivity: How Do Depressions Affect the Modeling of Hydrologic Processes?
(North Dakota State University, 2018)
Traditional delineation and modeling methods do not consider the spatial arrangement and dynamic threshold control of surface depressions. Instead, full structural hydrologic connectivity, uniform well-connected drainage ...
Bounding Surface Approach to the Fatigue Modeling of Engineering Materials with Applications to Woven Fabric Composites and Concrete
(North Dakota State University, 2011)
It has been known that the nucleation and growth of cracks and defects dominate the fatigue damage process in brittle or quasi-brittle materials, such as woven fabric composites and concrete. The behaviors of these materials ...
Modeling of Surface Microtopography and its Impacts on Hydrologic Processes
(North Dakota State University, 2014)
Understanding the impacts of surface microtopography on hydrologic processes is critical. The objectives of this thesis research are: (1) to evaluate the effects of DEM resolution on microtopographic characteristics, ...
Characterization of Surface Microtopography and Determination of Hydrotopographic Properties
(North Dakota State University, 2012)
Spatial characterization of surface microtopography is important in understanding the overland flow generation and the spatial distribution of surface runoff. In this study, fractal parameters (i.e., fractal dimension D ...
Carboxymethyl Cellulose Surface Treatment Method to Disperse Carbon Nanotubes in Smart Cementitious Materials
(North Dakota State University, 2019)
An innovative surface treatment method was proposed using carboxymethyl cellulose (CMC) to surface-treat carbon nanotubes (CNTs) for a consistent dispersion in cementitious materials to achieve high force detection ...
Analysis on Structural Modeling for Recycled Asphalt Pavement used as a Base Layer
(North Dakota State University, 2015)
Reusing RAP in the base layer became a common practice in the last decade. However, some crucial issues must be resolved to succeed in using RAP satisfying the standard specifications as a base layer. The most important ...