Show simple item record

dc.contributor.authorFernando, Hettige Supun
dc.description.abstractSeparation of seed coat from the cotyledon could result in an additional black bean food ingredient. The objective of this study was to develop a standard milling procedure that can achieve optimum seed coat removal from black bean seed. Black beans were cooked in boiling water for 0, 5, 10, and 20 min or were tempered to 10, 20, 30, 40 and 50% moisture. Then all samples were dried to the original moisture content in ambient air or at 90°C. Pretreated black beans were milled using a burr mill and a roller mill. Seed coat was removed by aspiration. Seed coat yield was greater with tempered than with boiled seed dried at 90°C. The chemical and physical changes in the bean flours were less in tempered-dried pretreatment than with cooked-dried pretreatments. Higher seed coat separation with less changes in flour is important in food applications with health benefits.en_US
dc.publisherNorth Dakota State Universityen_US
dc.rightsNDSU policy 190.6.2
dc.titleEffects of Pretreatments on Separating the Seed Coat from the Cotyledon of Black Beanen_US
dc.typeThesisen_US
dc.date.accessioned2018-07-25T17:06:24Z
dc.date.available2018-07-25T17:06:24Z
dc.date.issued2017en_US
dc.identifier.urihttps://hdl.handle.net/10365/28710
dc.rights.urihttps://www.ndsu.edu/fileadmin/policy/190.pdf
ndsu.degreeMaster of Science (MS)en_US
ndsu.collegeAgriculture, Food Systems and Natural Resourcesen_US
ndsu.departmentPlant Sciencesen_US
ndsu.programCereal Scienceen_US
ndsu.advisorManthey, Frank


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record